Wednesday, March 10, 2010

DIY: Wiring Meter Daihatsu Mira L2

Recently came across a good information from the net. It is a wiring conversion information from Perodua Kancil to Daihatsu Mira L2. For those Perodua Kancil 660 owner who wish to convert their meter to Mira L2, they may refer to the table below after the jump. For the RPM meter, you may tap the wiring to the air condition controller which located behind the drawer.



Daihatsu Mira L2

Green Black(Left Signal)
Orange(Ground)
Green Blue(Check Engine)
Yellow White(Turbo)
White Red(Battery)
Orange Black(Seat Belt)
Red Whiteh(IG+)
Yellow Red(Engine Oil Check)
Red (Handbrake)
Brown(Speedo Meter 20)
Green(Light)(Speedo Meter 0)
Red Green (High Beam)
Green (Right Signal)

Yellow Blue (FU)
Black Red (A)
Red Blue (Bulb)
White Black (Ground)
Brown White (Ground)
Yellow (TU)

9 comments :

For the RPM meter, you may tap the wiring to the air condition controller which located behind the drawer.

I dont understand... which wayer?? then tap to the which wayer on meter??

Hi,

The color of the wire is red/black.

Ben

Thanks Ben,but the red/black wire need to tap to where?? please... really need your help....

Hi,

Tap it to your meter red/black wire.

Ben

Hi Ben,
This is very usefull info, Thanks you very much. I done my wiring by myself with yr help. tq

Hi Low rider,

No problem. Do visit my blog for more DIY tips.

Ben

Hi Ben,

Would you please advise whether Kancil 660 year 2002 (square light) able to switch to Mira L2 speedometer?

Hi Ben,

I'm confused with the location of each wire ion the socket. I'm really appreciated if you can show me the location of the wire on the socket.

Thank you